Metric DIN 910 hexagon head screw plugs with collar/flange and cylindrical/straight/parallel thread are threaded plugs with an external hexagon head protruding from the collar end and cylindrical (parallel/straight) pipe thread along most of the length of the other end. The collar provides a larger bearing surface to seat flush in a preformed hole or on the surface of the mating substrate when fully tightened. The external hexagon drive allows significantly higher tightening torques when necessary. These plugs are typically used to seal cylindrically threaded holes in pipes and fittings carrying air, gases or fluids under pressure. Often additional sealing coating such as thread seal tape (“teflon tape”), a liquid pipe sealant applied to the threads, or preapplied sealant is necessary for a perfect seal. Metric DIN 910 hexagon head screw plugs with collar/flange and cylindrical/straight thread are available in brass, steel as well as stainless steel A2 and A4. Aspen Fasteners offers one of the most complete ranges of metric pipe plugs and other inch and metric industrial fasteners for immediate delivery from stock.
The following sizes of metric DIN 910 hexagon head screw plugs with collar and cylindrical thread are available for immediate shipping from stock: Diameters ranging from M10 to M48 in brass, steel and stainless steel A2 and A4. Purchase or view parts by clicking on the following link: DIN 910 hexagon head screw plugs with collar and cylindrical thread
To view (or free download) the full specification and standard pdf sheet with dimension, material, weight, technical, chemical and mechanical properties click on the link at the top of page